Plans & Kits

Day sailer

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick.

Simon found an older version of this boat back in the eighties and realized that its thousand-year-old design could be copied and preserved without too much difficulty. He measured it out in ’89 and Bill Nielsen lofted it and drew up the plans in ’91.

Flat-bottomed sailing skiff. Plans options include cross-planked or plywood bottom.

Construction: Cross-planked bottom, lapstrake sides

Alternative constuction: Plywood, glued lapstrake plywood

Lofting is required

Plans include 4 sheets.

Zipper is an 11 foot runabout based on designs of the 1950’s for Class ‘B’ stock utility racing boats by Hal Kelly and William Jackson.This design differs from those of the period in that it is to be constructed in the 'Instant Boat' method using glass fiber and polyester or epoxy resins to make

The Adirondack Guide Boat is known to be a fast and easy rowing boat. While it tends to be tippy, this is a result of what makes it fast, its narrow waterline. The distinct flare gives it strong secondary stability.

A 15' Inboard Plywood Powerboat

Lively, fast, planing racer/daysailer. Construction: Double-diagonal planking over steamed frames. Alternative construction: Cold-molded. Lofting is required. Plans include 4 sheets.

The Eureka is a pretty, simple to build plywood canoe built in stitch and glue, (44lbs down to 34) and paddles nicely. Very comprehensive plans - a boatbuilding course in a book.

Sunrise was my home for a decade. She has a typical New England Pinky hull with their extended bulwarks and mini-transom at their conclusion. She has comfortable accommodations for a couple to live aboard, with occasional guests.