If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
A stitch & glue tender that can be rowed, motored and that sails like a charm.
Tandem Row & Sail | CartoppableSpecifications:
Fliptail 6, 7 and 9 foot lightweight folding dinghies. They row well and can plane with an outboard up to 3.3hp and can be adapted to sail using an Optimist sailing rig.
Easy to build, well proven, great looking, tough and stable.
Our pre-cut kits have been cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is included with the kit.
The i550 is a very popular 18 foot stitch and glue design. Simple construction and avid builder blogs and websites add a sense of community and support for the builder.
The Duo is a simple to build 3m (10ft) hard chine rowing and sailing dinghy that can be built from just two sheets of 4mm (3/16in) plywood. It is also available as a nesting dinghy, so it can be stored on a cabin roof or even in the back of a car.
Bow and stern of English traditional narrowboat. Cutting files to produce a kit of steel parts for assembly. The midsection is a parralel box that can vary between 20 and 40ft. The midsection is produced by folding steel plate then adding the bow and stern.
This 20′ cutter will prove challenging to build, but will reward your efforts with incomparable charm and grace.Atkin specifies traditional plank-on-frame construction.Construction: Carvel-planked over steamed frames.Alternative construction: Cold-molded or strip.Lofting is require.Plans include
The Headwater Fourteen [H-14] was designed and the prototype built in the Summer of 1985 to test the viability of using frameless, stressed skin construction to build a serviceable Whitewater drift boat.
Construction - Glued lapstrake clinker plywood.No Lofting required.Plans include 8 sheets with photocopies of Classic Boat building series.Sail Area - 53 sq. ft.
Length: 18 feet, Beam: 8.25 feet, draft: about 1 foot.
21’ long, 16’ beam (reduces to 8'5" for trailering), strip plank construction, 850lbs with all ge
I built this PT 11 nesting dinghy from the CLC kit over this past winter, to replace a 9'6" Nutsh
