Plans & Kits

Cruiser/Racer boat.

A Swampscott dory-type daysailer with generous side decks and inside ballast.

Construction Method: Lapstrake over sawn frames

Lofting is required: Partial

Plans include 4 sheets.

The 18ft STRIKE is a sailing trimaran design that uses a 16ft beach cat as the outriggers/amas and rig. The main hull is plywood and has a dory shape that is extremely easy to build.

Bedard Yacht Design’s Ozona X Nesting Pram evolved from the hugely popular Ozona Pram and a significant demand from cruisers for a nesting dinghy, slightly larger.

TITICAT is a 9-meter sailing catamaran designed with a modern style for the transport of tourists and to build in strip planking. It was designed to sail on Lake Titicaca (Bolivia).

This is a simple 8ft stitch and glue sail/row pram. It requires only 3 sheets of marine plywood and should be very fast, easy, and inexpensive to build. It should end up just over 80lb so easy to transport as well.

This design came about when I got to thinking about having an elegant dinghy for our 34′ Topsail Ketch Sunrise.

The plans and construction manual for the plywood International 110 are available to any class member for use to build new or rebuild and restore an older boat.

Sharpie 31.5′ EGRETL.O.A.: 31′ 6 ½″SPARRED LENGTH: 35′ 6″L.W.L.: 26′ 3″BEAM: 8′ 6″DRAFT: 1′ 2 ¼″ /4′ 8″SAIL AREA : (Depends on rig)DISP.: 5,000# (approximate, for cruising)BALLAST: 1,500 lbs. lead, inside; additional to trim as needed.

Deck saloon voyager