Plans & Kits

A 14' Classic Style Runabout

Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is included with the kit.

“Goldfish” is the slightly smaller version of our “Happy Hour” fishing kayak. Splicing of plywood sheets is not required as is the case with “Happy Hour”. All parts of the boat fit within the length of a standard sheet of 1/4″ (6mm) exterior grade plywood 8′x4′ (2.4x1.2m).

TRAWLER YACHT 485

An expedition micro that will accommodate 2 adults for a week-end or a single-hander for up to 5 days. Ability to take on some weather and deliver solid performance while doing so. For the crew: forgiving and predictable but fast & fun. Launch time should be kept to a minimum.

In the winter of 2012 a very good friend leant me an old copy of Nautical Quarterly. An article about Catboats caught my attention — I was and still am taken by their beautiful lines.I decided to design one with the aim of building it in the summer.

A fast daysailer of stitch-and-glue plywood construction. Dismantles for cartopping. Deep V-hulls, no centerboard. Construction: Stitch-and-glue plywood over bulkhead frames. No lofting required. Plans include 3 sheets.

A classic double paddle solo canoe. This hull design has been built in many versions, from a simple light weight fast cruising canoe, to a full decked version of bookmatched walnut veneer.

Full-sized patterns for molds, so lofting is not required. Construction: Carvel-planked over steamed frames. Alternative construction: Lapstrake or strip. Plans include 4 sheets.

The Eureka is a pretty, simple to build plywood canoe built in stitch and glue, (44lbs down to 34) and paddles nicely. Very comprehensive plans - a boatbuilding course in a book.