Plans & Kits

Didi 34 radius chine plywood cruiser/racer

A fast daysailer of stitch-and-glue plywood construction. Dismantles for cartopping. Deep V-hulls, no centerboard. Construction: Stitch-and-glue plywood over bulkhead frames. No lofting required. Plans include 3 sheets.

Catamaran, 13 foot by 6+ foot wide. Wooden design using 1/4 ply and fiberglass covered. Single sailing Rig or optional Bi plane rig. Optional Cabin.

The Shearwater is an eye-catching, light and fast cruiser that does many things well. It is a strong contender for the budget-minded paddler looking to answer the 'if I could only have one kayak' need

NEW - COASTER Trawler Yachts & Work boats Here are the first of a new range of Coastal Trawlers that can customized to suit your desires and particular requirements. All will be excellent sea boat

Shoal-draft voyager

A stable (28 1/2″ beam) strip-built touring kayak.

Planked up with 1/4″ cedar strips.

Construction: Strip planked.

Lofting is required.

Plans include 4 sheets.

Athelas is a 17'-2" open water recreational rower for one or two based on a lines sketch by N. G. Herreshoff. Built from 6 and 9 mm glued lapstrake plywood, she weighs 81 pounds and can be cartopped

Kiska is a wood strip/epoxy single kayak. Based on Greenland kayak lines, this low volume kayak is playful but tracks well

Construction: Glued lapstrake plywood. Alternative construction: Traditional planking, cold molded, strip plank, epoxy-fiberglass. No Lofting required. Plans include 5 sheets.