Plans & Kits

Didi 34 radius chine plywood cruiser/racer

The Eureka is a pretty, simple to build plywood canoe built in stitch and glue, (44lbs down to 34) and paddles nicely. Very comprehensive plans - a boatbuilding course in a book.

Here is a fine little working type punt that feels at home in the marshlands, as well as the open bay waters.She is 14′-9″ long and was designed around a working load, with a draft of about 3″.

The Champlain is a good traditional style general purpose recreational canoe.

Beamier, but no less elegant than the Wee Rob, this more stable double-paddle canoe can carry sail better.Any of the three lengths (13′ 6″, 15′ 8″, or 17′ 3″) can be built using the same plans.You’ll notice the different stem patterns on plans page 5...

Developed by Chesapeake Light Craft, LLC, with designer Eric Schade, the 14′6″ Shearwater Sectional is a performance-oriented kayak that successfully bridges the gap between high performance, comfort, and stability.

Compromise sloop designed by N.G.

Didi Cruise-Mini radius chine plywood cruising sailboat

Roberts SPRAY 22 trailerable cruising sailboat you can build in wood epoxy using the plans and full size frame patterns.

Keel/centerboard cutter designed by Edward Burgess in 1888 and first of his “Compromise 40-footers”.The plans produce a model that is 25″ long.You’ll receive 4 pages of plans historical information about the boat and step-by-step instructions for half-hull building,using the lift method.There are