Plans & Kits

Didi 23 radius chine plywood trailer-sailer

Seaworthy, stable, and easily rowed. Here is a pod that is a bit smaller than most, but she will still carry a big load and bring you through some lumpy water with confidence.

Elegant, high-performance, sliding-seat pulling boat designed to mitigate the speed-robbing pitching associated with some sliding-seat craft.
Construction: Lapstrake planked over steamed frames.
Alternative construction: Cold-molded, strip or glued lapstrake.

- Trawler Yachts & Work Boats

SF Pelican 12 foot: Three sheets of drawings, step-by-step building instructions, sail plans, lists for materials and hardware, and sailing handling information.
Note: Drawing plans come in pdf format and can be printed to full hard copy format.

Roberts 434 Wood Epoxy Sailboat

This schooner is intended as a comfortable cruising yacht for a couple with occasional guests, and to be of simple construction so that Jack everyman can build it.  It has a twin keel / centreline rudder configuration.  

Simplicity of construction, user friendliness (both for single or double) and high performance – all of this with reasonable costs. These are the main priorities which lie at the base of the DP 14’ design and which justify the main choices made, in particular:

Construction - Glued Lapstrake clinker plywood. No Lofting required. Plans include 5 sheets with instructions. Sail Area - 67 sq. ft.

Speed, good looks, and comfortable seating were the designer's main criteria for this double-ended centerboard daysailer.

Construction: Cold-molded over strip-planked inner skin.

Alternative construction: Strip, carvel planked (transom stern).

Lofting is required.