Plans & Kits

Offshore cruising catamaran

SPHERA is a simple cruising boat, studied for the maximum ease of construction in relation to its size.

An outboard skiff with a wide bottom and moderate rocker that contribute to stability and the ability to carry weight back aft.
Construction: Cross-planked bottom, lapstrake sides

Alternative construction: Plywood or glued-lapstrake plywood

Lofting is required

Classic sport fishing boat in the style of the Abaco boats. A classic, smooth riding, variable deadrise hull finishing with 17 degrees deadrise at the transom.

The Lorna has a slim sweet hull for experienced paddlers.

Caprice is a Mini Offshore Cruiser for two.

Built with double sawn frames and strip plank, this little gaff cutter is designed for long term cruising.

ROBERTS 470 - WOOD EPOXY
The accommodation of this design has been laid out to suit two couples. The Roberts 470 makes a fine long distance cruising yacht.

V-bottomed single shell with sliding seat, outriggers and light plywood construction.

Construction: Plywood planking over bulkhead-type frames.

No lofting is required.

Plans include 4 sheets.

A 10 ft. traditional lapstrake-planked Norwegian style pram. Strikingly elegant but very practical rowing tender.

Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease. The ladder frame—the “foundation” of the boat—is now included with the kit.