Plans & Kits

Short handed offshore racer

Virginia Park is an elegant lapstrake launch. Featured in WoodenBoat #234, Sept. – Oct. 2013, Virginia Park is built in the glued lapstrake method with steam bent frames.

Fine boatyard skiff or small harbor ferry. Construction: Plywood planking over bulkheads. Lofting is required. Plans include 4 sheets.

Meghan has a constant deadrise V-bottom hull with  a capacity of 1-2 passengers and features for & aft flotation chambers. Her rig consists of a 16ft free standing mast, 9′5″ wishbone boom and 65 square ft sail.

A handsome daysailer based on the Herreshoff Fish Class, but with a centerboard conversion similar to that of the Haven 12 1/2.

Construction: Carvel planked over steam-bent frames.

Lofting is required.

Plans include 6 sheets.

Beamier, but no less elegant than the Wee Rob, this more stable double-paddle canoe can carry sail better.Any of the three lengths (13′ 6″, 15′ 8″, or 17′ 3″) can be built using the same plans.You’ll notice the different stem patterns on plans page 5...

The Crystal 16 was designed to be a simple, lightweight flats skiff. Her hull is a simple V-bottom with a bit of flare in her topsides. Her deck features a large casting platform forward with two smaller platforms back aft on both sides. Storage is available up forward below the casting deck.

PUCK 550 REGATA has been designed with the intention of creating a MICRO CLASS easily and quickly realizable with the stitch and glue method, but able to compete seriously in the class.

Carvel-planked, outside ballasted cruiser with choice of three or four berths.

Construction: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Sail Area : Sloop - 528 sq. ft., Yawl - 579 sq. ft.

Lofting is required.

Fast offshore cruising catamaran