Plans & Kits

A 15' Inboard Plywood Powerboat

Concept: The CCSF25 is a high performance offshore fishing and family boat, she has a classic running surface of 24 degree deadrise and 8.5' max beam. Wide chine flats for knocking down spray, integrated lifting strakes for high speed handling and directional control.

ROBERT 19 WOOD/ EPOXY “CRUISING” SAILBOAT

Read about one mans exciting voyage from Canada to Australia in this 19ft trailer sailior.

Genevieve Desjardins Yacht "Pere Peinard"

L.O.A. : 14'-9" - Beam 54"
For Rowing or Electric Outboard.

DIAPASON is a small cabin cruiser 7,50 m length. It is a modern, simple boat with racy lines, good performances and internal accommodations suitable for cruising.

SPRAY 36 -  Wood Epoxy - Gaff rig - Bermudian rig - Junk rig

20' LOA carvel-planked open daysailer. Construction: Carvel planked over steamed frames. Alternative construction: Cold-molded or strip. Lofting is required. Plans include 4 sheets, and suggested for experienced builders only as the plans info is sparse.

This is a simple 8ft stitch and glue sail/row pram. It requires only 3 sheets of marine plywood and should be very fast, easy, and inexpensive to build. It should end up just over 80lb so easy to transport as well.

Modern and efficient, the Freedom 17 is a fast responsive tripping canoe that's also easy to build.

M80, is a simple to build plywood trailable trimaran, plans are very complete and include DXF files for CNC cutting.A standard folding system is used to faciltate trailing by road at a folded width of 2450mm.The interior consists of two wing berths 2000 x 600 a single up forward 1900 x 700 with r