Boats For Sale Online

Length 12' Beam 41/2 Brand new sail, custom flotation, beautiful woodwork, needs no work, glassed wood hull. $2,000

Designed by: John G. Alden (Naval Architect). Alden Design No. 618F is a 36 ft Cutter/Sloop, Full Keel with an After Cockpit. This classic was built in the yards of James E. Graves, Inc., Marblehead, MA and is powered by its original 55-hp Gray Marine gasoline engine.

Built in 1940 by Ira Hall in Seattle. Ed Monk design. 22' LOA and 20' on deck. 6.5' beam and 5' draft. Cedar planking over oak frames. Inboard diesel Yanmar 1gm10 motor runs good. Decent sails. Still has original wood stove. Two bunks. No known major issues.

Tegolin is a 26ft Maurice Griffiths 'Athene' design with triple keels and 3ft draft. Hull is larch on oak with epoxy sheathing. Engine is 16HP Vetus. Raymarine navigation, Taylor paraffin stove, full set of sails. 2-3 berths. Needs new mast. Currently in North Wales, UK.

1960 Rhodes sloop, 40 hp diesel, last in Lake Michigan 2022. Needs cosmetics, has a couple cracked frames. Free to a good home. Located in Montana.

36’x12’8” Lobster boat built by Buxton Boats in Stonington, ME. Cedar over oak construction. Port side haul. C7 CAT engine, 10,000 hours. $100,000.

13' "Melonseed" daysailer. Okume marine plywood with fiberglass/epoxy skin. Home built 2023. Wood (fir) spars. Canvas cover. Oars & oarlocks.

Asking $2,800.

Located Ocean City, NJ.

Rigged for high performance sailing or a relaxing afternoon in the bay, this handcrafted wooden sailboat is ready for the water!

Peter Buxton completely restored 1927 Cutter. Long leaf yellow pine on black locust frames. Has not been in water since restoration: boat is like new. All new systems, new low hours engine, 6’10 plus headroom below, self-draining cockpit.

FREE-33 ft. JOSEPH HACK DESIGNED SLOOP
8 ft. beam
4 ft. draft
Hull strip cedar on oak, fiber and epoxy covered

Canoes built by Jerry Stelmok, 20’ and 13’ in very good condition. Must see. $3,500 each.

Original hull, Cedar on Douglas Fir, in good shape; bronze centerboard; new deck in 2021 - epoxy, marine mahogany; tractional sloop (rigging), all lines included. Completely sanded and painted (Interlux). Original dacron sails match to construction # 3917; Trailer full rebuild 2021 included.

A Classic Beauty with Exceptional Restoration

Wood composite construction, professionally built, beam 8 feet, draft 16 inches. Very good condition. Cruise 15 knots top speed 21 knots. 60hp suzuki outboard four stroke Very reliable and economical. Has v berth, head,galley, and nice cockpit with seating.

All parts original including the canvas and cane seats. No repairs were required. Refinished with four coats of varnish. Painted canvas with Kirby #38 Irish green. Two display cradles painted to match canoe. Refinished original paddles: 51”, 59”, and a 7’10” kayak paddle. Boat show ready.

Handcrafted by Wooden Boat USA, the Wooden Canoe with Ribs and Curved Bow is a striking 12-foot paddle canoe that blends traditional design with modern craftsmanship.

Crafted for elegance and performance, the Wooden Kayak Miramichi 17 Ft is a one-person vessel designed by Wooden Boat USA.

A canoe yawl made of native cedar planking over oak frames maintained by Paul and Nat Bryant of Riverside Boat Company in Newcastle, Me. since 2013, and current location.

This Venetian Gondola (K208) by Wooden Boat USA (2025) captures the elegance of traditional Venetian craftsmanship in a modern, fully functional wooden boat.

Designed by Joel White, built by Wade Dow in Brooklin, ME.

"Long Cabin" version, LOA: 24 feet, Beam: 7'9", Draft: 3'6".