Virginia Park is an elegant lapstrake launch. Featured in WoodenBoat #234, Sept. – Oct. 2013, Virginia Park is built in the glued lapstrake method with steam bent frames.

In the winter of 2012 a very good friend leant me an old copy of Nautical Quarterly. An article about Catboats caught my attention — I was and still am taken by their beautiful lines.I decided to design one with the aim of building it in the summer.

‘Volare’ comes in two versions. This is the utility version, the console version is available as a separate set of plans. They’re both 15′4″ long and 5′ wide.Her length is that of two sheets of 8′ plywood and she’s built in two halves (bow end and stern end).

In the spring of 2013, I started to write a book called, How to Design a Boat using SketchUp 3D Software. The subject matter was my design, ‘Kalostyn’.

Kalostyn was designed as the subject matter of a book that I had planned to write called, How to design a boat using SketchUp 3D software.I created a design that had lots of curves in order to demonstrate how to put these curved forms into a 3D model, and then create and export the the f

“Trixie” began as an idea for a small and simple to build plywood tender, able to get out to a mooring with two or three on board, that was very light, incorporated wheels to enable transport to the slipway, was designed to provide the maximum space from two sheets of 1/4″ plywood, and could be p

Zipper is an 11 foot runabout based on designs of the 1950’s for Class ‘B’ stock utility racing boats by Hal Kelly and William Jackson.This design differs from those of the period in that it is to be constructed in the 'Instant Boat' method using glass fiber and polyester or epoxy resins to make