This hypnotically striking canoe yawl ranks among the most admired designs of our time.

Construction: Carvel-planked over steam-bent frames

Alternative construction: Cold-molded

Lofting is required

Plans include 9 sheets

This 20′ cutter will prove challenging to build, but will reward your efforts with incomparable charm and grace.Atkin specifies traditional plank-on-frame construction.Construction: Carvel-planked over steamed frames.Alternative construction: Cold-molded or strip.Lofting is require.Plans include

This beautiful 11′ 2″ dinghy is similar in construction to the Nutshell Pram, although it is slightly larger, with a pointed bow.Construction: Glued-lapstrake plywood.Alternative construction: Traditional lapstrake.No lofting is required.Plans include 5 sheets.

This cozy pocket cruiser combines simple sheet-plywood construction with more than a touch of elegance.Her board-up draft of 1′6″ lets you explore secluded coves and is easy to haul with a trailer.Construction: Plywood planking over sawn frames.Lofting is required.Plans include 6 sheets.

Safe, seaworthy, shoal-draft double-ender, with a flat bottom and centerboard. Lofting is required. Plans include 4 sheets.

This dinghy could be considered a big little boat.

She has a lot of excellent qualities: excellent rowing and sailing ability, easy construction, and mannerly towing habits.

Construction: Glued-lapstrake plywood.

Alternative Construction: Traditional lapstrake.

A simple and seaworthy V-bottomed centerboard cruiser with accommodations for two.

Construction: Plywood planking over sawn frames

Lofting is required

Plans include 10 sheets.

Designed for strip-planking, the Controversy 36 features light displacement and good headroom, with light and open space throughout.

Construction: Strip-planked over bulkheads and frames

Lofting is required.

Plans include 16 sheets.

This design has a built-down keel to provide a deeper bilge, a centerboard housed entirely within the ballast keel, and a straight sheer.

Construction: Strip-planked over bulkhead / frames

Lofting is required.

Plans include 8 sheets.

This is a centerboard cruising boat for couples and small families. Lightweight and strong, it can be easily hauled with a trailer. Construction: Plywood topsides over bulkheads and stringers; strip planked bottom Lofting is required. Plans include 6 sheets.