V-bottomed cruiser designed for plywood construction with accommodations for two and inside ballast.Construction: Plywood planking over sawn frames.Lofting is required.Plans include 11 sheets.Please note: gaff rig version’s mast measurements are taken by scaling from the plans.Notice the below de

The latest in Bill Garden’s idea of the perfect kid’s cruising boat. Simple enough to be put together in the garage, salty enough to daydream on, and safe enough as well. She’s quite a handsome double-ender, with a fixed keel. This is an “oh my” boat.Construction: Plywood planking over sawn frame

Please note: this design was formerly known as Pike.

Construction - Glue-lap-plywood flat bottom.

Alternative construction - Traditional plank.

No Lofting required.

Plans include 3 sheets with instructions.

Sail Area - Sprit 60 sq. ft.

A shoal-draft, two-sail bateau from the Chesapeake - comfortable cruising for a couple and a daysailing party.

Construction: Traditional Chesapeake bateau construction.

Lofting is required.

Plans include 7 sheets.

Centerboard sloop with inside ballast and two settee berths for coastal cruising.

Construction: Carvel planked over sawn frames.

Alternative construction: Strip.

Lofting is required.

Plans include 5 sheets.

Elegant, lightweight, sailing/rowing skiff. Construction: glued lapstrake plywood. Alternative construction: carvel, strip. No lofting is required. Plans include 6 sheets and instruction booklet.

This 24' Australian design provides three arrangements to choose from-a small cuddy, or two cabin styles.

Construction is plywood with a single hard-chine.

Construction: Plywood planking over sawn frames.

Alternative construction: Strip.

Lofting is required.

A most elegant lapstrake, plywood peapod for oar and sail.

Full-sized mold patterns are included.

Construction: Glued-lapstrake plywood.

Alternative construction: Traditional lapstrake.

No lofting is required.

Construction: Glued lapstrake clinker plywood. Alternative construction: Traditional plank, cold molded and strip plank.

Sail Area: Lug 62 sq. ft.
Gunter sloop 72 sq. ft.
No Lofting required.
Plans include 6 sheets.

Build the Babson 14 from scratch! Plans include three variations on the hull: sheet ply (like our kits), glue-lap-ply, power, suitable for up to a 2 horsepower outboard.Plans contain 16 sheets of drawings, full-sized mold patterns so no lofting is required (no offsets are included with the plans)