PuddleCat Adventure
Catamaran, 13 foot by 6+ foot wide. Wooden design using 1/4 ply and fiberglass covered. Single sailing Rig or optional Bi plane rig. Optional Cabin.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Catamaran, 13 foot by 6+ foot wide. Wooden design using 1/4 ply and fiberglass covered. Single sailing Rig or optional Bi plane rig. Optional Cabin.
Small blue water cruiser with Junk rig, inside steering station, and accommodation for up to four persons.
Suitable for home boatbuilders, all wood construction, lead ballast cast in small pigs.
Thank you for considering my plans for BOWLER, a “cruising” version of my TOP HAT launch. These boats are descended from Harry Bryan’s inspired Handy Billy design, which in turn can trace it’s origins back to William Hand's vee bottom designs from the early 20th century.
This small dinghy can be used for fishing, pleasure rowing or as a tender for a bigger yacht. It can also be fitted with a small outboard motor. The boat has a relatively high freeboard and can take a fair amount of load. It handles very well small waves or wake caused by powerboats.
This V-bottomed daysailer can be shallow or deep drafted and is easily sailed.
Construction: Batten-seam planking over steamed frames
Alternative construction: Plywood
Lofting is optional.
Plans include 6 sheets.
A new M80 has been launched in NL.
This tri was built by the ultimate wooden boat builder, Eef, a legend now 81 years has built several wooden multihulls is very happy with his new creation.
For more information on the M90, the M80 and M60 visit:
Zipper is an 11 foot runabout based on designs of the 1950’s for Class ‘B’ stock utility racing boats by Hal Kelly and William Jackson.This design differs from those of the period in that it is to be constructed in the 'Instant Boat' method using glass fiber and polyester or epoxy resins to make
This is a boat simple to build, economical to use and that has a minimum of habitability and a lot of deck space for outdoor living.The construction method is the “stitch and paste” because of its small size.The hull is in CPM 10 mm thk.
The Workstar 17 concept of plywood/epoxy boat building was the result of a co-operation between Working Boats UK Ltd and Humphreys Yacht Design, which enabled people with no experience in building boats to put together, from a comprehensive kit of profiled parts, epoxy and FRP tape, a Workstar 17
Athelas is a 17'-2" open water recreational rower for one or two based on a lines sketch by N. G. Herreshoff. Built from 6 and 9 mm glued lapstrake plywood, she weighs 81 pounds and can be cartopped
Offered here is a beautiful 1958 Ohlson 35' sailboat that's ready for a new home.
All hardware original, complete set Harken blocks. Mast, boom cuddy bars and tent.
$11,900 - Beautiful, reliable boat Complete restoration.