Oar / Paddle
Sail Kit for kayaks
The Sail kit allows you to transform the canoes NINFA, NAIADE and ONDINA, in small sailing trimarans for coastal cruising with minimal efforts.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
The Sail kit allows you to transform the canoes NINFA, NAIADE and ONDINA, in small sailing trimarans for coastal cruising with minimal efforts.
The PUCK reflects the spirit of the original class which was to create a boat used in regattas but also suitable for coastal cruising, easy to carry and inexpensive.
“Goldfish” is the slightly smaller version of our “Happy Hour” fishing kayak. Splicing of plywood sheets is not required as is the case with “Happy Hour”. All parts of the boat fit within the length of a standard sheet of 1/4″ (6mm) exterior grade plywood 8′x4′ (2.4x1.2m).
The F1430 is a unique sit-on-top stitch and glue kayak.
Mia was the second design that I published, a 12′ runabout, inspired in part by William Jackson's 1955 design for the “Ace” which was produced by the Sande Boat Works between 1956 and 1962 (www.sandeace.com), and in part by the 1950’s designs of Hal Kelly.Mia
Rugged little launch with generous beam.
Construction features a traditional backbone of bolted-up oak, steam-bent frames and strip-planking. Four different arrangements are shown.
Construction: Strip-planked over steam-bent frames.
The flat-bottomed skiff can be both the most and least refined craft afloat.Popular by their ease of construction.Construction: Plywood planking over bulkhead frames.Alternative construction: Cross-planked bottom, planked sides (details included).Lofting is required.Plans include 5 sheets, and in
Construction: Glued lapstrake plywood. Alternative construction: Traditional plank, cold-molded and strip planked. No Lofting required. Sail Area : 30 sq. ft. Plan includes 6 sheets.
A simple and seaworthy V-bottomed centerboard cruiser with accommodations for two.
Construction: Plywood planking over sawn frames
Lofting is required
Plans include 10 sheets.
A modified V-bottom, with constant deadrise in its after sections. Construction: Plywood and Mahogany over sawn frames. Alternative construction: Cold-molded, double laminated plywood. No lofting is required. Plans include 8 sheets.
Nautilus is one of the best surviving examples of Ben Seaborn's design and the Blanchard Yard's c