DRAGONFLY
Fifteen-year-old Andrew Seguin built this Dynamite Payson designed work skiff between march and August 2002. It is Payson design number 606, 18' long with a 5' beam built out of plywood and mahogany.
This section of our web site, an extension of the Launchings department of WoodenBoat magazine, is dedicated to sharing news of recently launched wooden boats built or restored by our readers. If you’ve launched a boat within the past year, please email us at launchings@woodenboat.com, or post your news here. (All posts are subject to approval and editing before being made live.)
To refine your search, add quote marks. If you search Wood Duck, you will get all the listings which include Wood and Duck. To refine, search “Wood Duck” and you’ll see just Wood Duck results.
Fifteen-year-old Andrew Seguin built this Dynamite Payson designed work skiff between march and August 2002. It is Payson design number 606, 18' long with a 5' beam built out of plywood and mahogany.
15′ skiff DIABLO by Phil Bolger and taken from a Dynamite Payson book. I enjoyed this project. It was my first boat build. I tested with the outboard shown but will probably remove it. I modified the rear seat with a center seat, and added a bow seat. I took it out in San Diego bay.
Launched my Skunk Island Skiff sailing version built from plywood and pine. Douglas fir mast, spars and oats. Stainless steel fasteners and hardware.
Ed Vickery helped to build and repair boats for quite a while before he built his first wooden surfboard. He built it from several woods including bamboo, black walnut, fir, aframosa, and paulownia; then covered everyting with a layer of 4-oz fiberglass.
This is my 18′ Carolina dory. Materials are from local lumber yards except for the bronze screws. This was a fun project, the plans from Spira International were easy to read and the boat gets plenty of compliments.
Jonathan White of Victoria, Australia built this Acorn dinghy in just five months. It is made of 6mm marine plywood and hoop pine with five coasts of varnish all around, and another five coats inside for good measure.
David Jarrett rescued this boat and spent one year restoring it, before launching it in July 2002. It had been in storage for years, and had numerous layers of paint and varnish to be removed. He refinished the hull and replaced the seats and floors.
This strip-planked Sea Island Sport Kayak was built by Paul Schriever of Fernandina Beach, Florida.
When Covid hit I realized I would have time to build a boat. So, I did, a Glen-L zip caught my eye and I got started. I wanted the look of the boat, but I also wanted to go fast so I over built and put on a bigger than suggested motor.
Rick Miller of Miller Marine Systems completed this Penobscot 14 in 2003. She is a pulling version of the Arch Davis 14' x 4'6" design, using a daggerboard. LOLLYPOP was delivered to her owner, Charles Ward of Barbados, West Indies and launched on December 25, 2003.
Complete with spars and sails. Lying Cape Cod. Last restored c1970. Cockpit and deck are newer.
Lord Nelson Royal Navy 1798 pattern Pinnace. Pine on oak. Length 28.5 feet. Needs few repairs.