This section of our web site, an extension of the Launchings department of WoodenBoat magazine, is dedicated to sharing news of recently launched wooden boats built or restored by our readers.
If you’ve launched a boat within the past year, please email us at launchings@woodenboat.com, or post your news here.
(All posts are subject to approval and editing before being made live.)
To refine your search, add quote marks. If you search Wood Duck, you will get all the listings which include Wood and Duck. To refine, search “Wood Duck” and you’ll see just Wood Duck results.
Frank Bailleul launched his sea kayak CORRYVRECKAN built and designed by Sardine Boats on the Bono river, south Brittany-France. The CORRYVRECKAN is a stitch-n-glue kayak designed for tall paddlers and touring.
MALUHIA means safety, serenity, and peace in Hawaiian. She is a John Gardner designed Carolina Dory, 19′8″ x 8′6″. Russell Durler of Layton, Utah built her using Douglas fir and white oak, and launched her in July 2000.
This boat was built to use in the sounds and inland waters of eastern North Carolina. Framing is douglas fir, with marine plywood planking for the hull. Two layers of 10oz fiberglass cloth were added to the hull for strength and durability. Powered by a Yahama 90hp two stroke.
James McFadden, age 4, has a wonderful pilot in his 11-year-old brother Dominic, on this Chesapeake Light Craft 14′ Wood Duck Double Kayak. Dominic built it with a little help from his grandfather, Ned Farinholt. Dominic and James live near the Shenandoah River in Front Royal, Virginia.
Alan Powell uses this 9' skiff for fishing and exploring the Berowra Waters on the Hawkesbury River, north of Sydney, Australia. She is a Karl Stambaugh "Weekend Skiff 3" design that appears in the book Good Skiffs.
The owner of this classic 30-ft Grandy, Jon Kjaerulff of Gig Harbor, Wash., took his Express Cruiser to Gig Harbor Marina & Boatyard for a much-needed transom repair.
Jim Hammond replaced seven frames on this 16 x56" motorboat, repaired the lower transom, refinished the motor (1958 Big Twin Evinrude) and installed a new windshield. Then he gave it a few (9) coats of varnish. Johnson Boatworks of St. Williams, Ontario, built the boat in 1957.
Bruce Porter bought the plans for this Simmons Sea Skiff from the Cape Fear Museum in North Carolina. He used marine mahogany plywood over white cedar frames, and added gunwales made of white ash and Douglas-fir.
Raimo Repo of Ontario built JOY, a 13' Chamberlain dory skiff, from lines drawn by the late Mr. John Gardner. He bought the plans from the Mystic Seaport Museum after attending the WoodenBoat Show at Mystic in the late 1990s.
Built by professional Vermont furniture maker. In exceptional condition.
This Venetian Gondola (K208) by Wooden Boat USA (2025) captures the elegance of traditional Venet
This is the launch of my cutter based a design by C P Kunhardt from 1885.
