This section of our web site, an extension of the Launchings department of WoodenBoat magazine, is dedicated to sharing news of recently launched wooden boats built or restored by our readers.
If you’ve launched a boat within the past year, please email us at launchings@woodenboat.com, or post your news here.
(All posts are subject to approval and editing before being made live.)
To refine your search, add quote marks. If you search Wood Duck, you will get all the listings which include Wood and Duck. To refine, search “Wood Duck” and you’ll see just Wood Duck results.
Raimo Repo of Ontario built JOY, a 13' Chamberlain dory skiff, from lines drawn by the late Mr. John Gardner. He bought the plans from the Mystic Seaport Museum after attending the WoodenBoat Show at Mystic in the late 1990s.
Rich Gaito is seen here sailing JAYLENE KERR off Merchant Island, just south of Stonington, Maine. JAYLENE KERR is a Joel White Shearwater design (16' x 53" beam) that Rich built during the winter of 2001-2002. He used plywood lap construction on laminated frames.
Jim McQuaide and Eric Schade spent August of 2008 building canoes at the Maine Maritime Museum in Bath, Maine. Eric built the Schoodic 14 design, while Jim built a Schoodic 17.
Doyle Herman started restoration of this 15' Wagemaker in September of 2001. He launched it in May 2002. He stripped the boat to a bare hull, replaced the deck plywood and part of the transom. Wolverine Boats of Grand Rapids, MI built the boat in 1957.
I built this kayak for my 12-year-old granddaughter. When her mom was that age she had a small sailboat. So I decided to add a drop-in sail rig to the kayak so she can use the boat either way.
40′ on deck and 49′ with bow sprit, S.Y. RAVENSONG was built by Denis Brown in Ventura California and launched in 1934. Her hull is 38mm thick, single stripped plank construction of Californian Red Cedar from the giant redwood forests. Mast and spars are Canadian Oregon and Canadian Spruce.
Tammie Norrie 15 foot dinghy
My first boat !
I started her late 2017 but in March 2018 I quit my job and worked on her every day.
After the parts were cut from marine plywood by their grandfather, Tavish and Niam Rogers assembled their first boat using copper ring nails and polyurethane construction adhesive.
Seggerling racing dinghy, mahagony-okume combi marine plywood.
Racing Nr.: HUN-405
https://www.facebook.com/My-Sailing-Logbook-253068374743825/
GNALGAN has been my project over the winter months in Victoria, Australia. The name is an Australian Aboriginal word for the “Nankeen Night Heron.”She is made of 4mm marine ply which has been coated inside and out with fibreglass.
Built by professional Vermont furniture maker. In exceptional condition.
This Venetian Gondola (K208) by Wooden Boat USA (2025) captures the elegance of traditional Venet
This is the launch of my cutter based a design by C P Kunhardt from 1885.
