Launchings

PRISCILLA C is a small steam launch based on a Stuart Turner 5 A single cylinder engine of 2 1/4" bore and 2" stroke. It produces about 1/2 HP at 30 PSI from a water tube, wood fired boiler.

David Satter restored this 1931 Old Town Canoe in 2002, after paying just $100 for her at a yard sale in NJ. It is an Old Town 50-lb 15 model. He replaced 10 ribs and 30 feet of planking, and replaced the canvas; then gave her a new coat of paint and varnish.

Ted Jones of Gundalow Boat Shop in Ossipee, NH designed and built this 11'6" dory skiff BANNITO for his son and grandson. She was launched in September 2002 on the Sakonnet River in RI. Her hull is okoume plywood with epoxy and Dynel. She is based on his earlier design, the DORITA dory.

Bob Case built this Arctic Tern kayak from a Pygmy Boats kit. It is 14' long with a 23" beam. He added a little artwork on the foredeck, an Inuit representation of an Arctic tern, with red eyes on a white background. He writes that the boat was a joy to build and a joy to paddle.

Winnie is an Alcort Standard Sailfish built in the 1950s in Waterbury, CT. She came to us mid restoration from New York, we painted her and put her back together. She will sail in a whisper of a breeze and keeps you on your toes when the breeze picks up.

Jim Maas designed and built this 17'6" flat-bottomed skiff. Launched in the summer of 2001, it is the fourth boat he has built. He boats mostly in the Chesapeake Bay and Delaware River, but spent some of the summer at Lake Newboro, Ontario, where he says that wooden guide boats are not uncommon.

Hagoth is an epoxy-glued stitch and glue Annapolis Wherry Tandem by Chesapeake Light Craft. Jared launched the boat on 9/19/12 at Utah Lake. This picture was taken on 3/29/13. The boat was built during a week long class in April of 2012 and finished over the span of 5 months.

Frank Crumbaugh spent most of Summer 2015 at the WoodenBoat School. He brought home a Fundamentals Class Catspaw dinghy, finished her over the Winter 2015-2016, and launched on 25 August 2016.

Paul Edgar sent these pictures of his recently launched MINOQUA, a 22′ Princess sharpie from B & B Yacht Designs.

Rivus, a 16′ melonseed, was launched on August 30, 2014. She was built from Marc Barto’s WoodenBoat Store plans, glued lap construction. Her rig was designed by John Brady of Philadelphia’s Independence Seaport Museum.