This section of our web site, an extension of the Launchings department of WoodenBoat magazine, is dedicated to sharing news of recently launched wooden boats built or restored by our readers.
If you’ve launched a boat within the past year, please email us at launchings@woodenboat.com, or post your news here.
(All posts are subject to approval and editing before being made live.)
To refine your search, add quote marks. If you search Wood Duck, you will get all the listings which include Wood and Duck. To refine, search “Wood Duck” and you’ll see just Wood Duck results.
Displacement hull launch with 4 HP outboard. Build as batten-seam construction from Alaska Yellow Cedar and Port Orford Cedar lumber (full length 1x6 stock). Bottom is 2 layers 1/2″ marine plywood with epoxy fiberglass to the waterline.
Early September saw the launching of cedar strip planked Stand-Up-Paddleboard, designed and built by Andrew J. Malcomb of Dwarka Boatworks in Central Mass.
Based on the lines from the freedom 15 canoe design from bear mountain boats. Glued lapstrake marine plywood, fiberglassed inside and out, Epifanes polyurethane finish. Ash trim. Custom paddles and bowline. Very stable and a real head turner at the launch.
Just in time for the winter sailing season; Carpinteria Dory Company (http://www.carpdory.com) recently completed this Maine Peapod designed by Arch Davis (http://www.archdavisedesigns.com).
Rudy Robichaud spent four years building MEADOW BIRD, a 16' modified Titmouse design. Rudy writes that Sam Rabl did the original design, and Karl Stambaugh modified it for Gary F. Clements, who has plans available at GFC Boats, 490 Hagan Rd., Cape May Court House, NJ 08210.
Solar powered electric launch using CLC Southwester Dory plans. She has a 3-hp Torqeedo motor mounted in a well as well as Torqeedo solar panels. Shaw and Tenney oars and a sprit rig provide towing and sailing options as well. A Norwegian tiller runs fore and aft.
Jim Maas designed and built this 17'6" flat-bottomed skiff. Launched in the summer of 2001, it is the fourth boat he has built. He boats mostly in the Chesapeake Bay and Delaware River, but spent some of the summer at Lake Newboro, Ontario, where he says that wooden guide boats are not uncommon.
Robert Fraser used the designs of older C-4s to create this class boat. A C-4 class boat for Canada cannot be more than 20' long (6.1 meters), must have a minimum beam of 2'6" (76 cm), and weigh at least 68.34 pounds (31kg).
THELMA is an 11’4” cedar strip canoe with Douglas Fir gunwales and Ash stems. She is the first boat built by cousins Tristan and Tom and was made under a tarpaulin shelter at the end of their garden in Southampton, England.
Built in 1972 by Trumpy Yachts in Annapolis, MD overall length is 72' / 21.95m, with a beam of 18
Solid wood construction (pine?), 18' 4" length, roller reefing, from 1960 Polish built
"Sarah Mead" #59, advertised as "Maine's Sailing Lobsterboat" is looking for her next adventure.
