This section of our web site, an extension of the Launchings department of WoodenBoat magazine, is dedicated to sharing news of recently launched wooden boats built or restored by our readers.
If you’ve launched a boat within the past year, please email us at launchings@woodenboat.com, or post your news here.
(All posts are subject to approval and editing before being made live.)
To refine your search, add quote marks. If you search Wood Duck, you will get all the listings which include Wood and Duck. To refine, search “Wood Duck” and you’ll see just Wood Duck results.
Fiberglass cloth/epoxy and marine plywood on pine frame powered by 30hp Suzuki. During construction of interior we added mahogany rail caps and a front anchor locker with seat and hardware.
Willy Hampton says the homeport for his new modified Rozinante yawl is Earth, but he sails out of Portsmouth, Rhode Island. Doug Hylan (www.dhylanboats.com) reworked the L.F.
The eight coats of varnish Jeffrey Fette applied to HONEYPIE II don't seem enough to protect this beautiful strip-built kayak designed by Ted Moores. Jeffrey used alternating strips of ash and merantion the sides and layered ash on the cockpit coamings.
A presentation of the Little Miss Sally boat in Small Boats Monthly inspired me to build the boats for my kids.
Over 40 years ago, boatbuilder Ray Speck drew the lines for the Sid skiff. He was living in Sausalito, California, at the time and admired JAYNE, a skiff owned by the harbormaster, Sid Foster.
CHRISTIN MARIE is a modified version of Reuel B. Parkers Exuma 52 design. This is a shoal draft, pilot house, centerboard schooner. Hull is cold-molded, covered in Xynole-Polyester cloth. I modified the cabin to allow for walk-through in the NW colder climate.
Designed by Bob Perry and built by the Northwest School of Wooden Boatbuilding in Port Hadlock, WA, the FRANCIS LEE is a 62 foot double ended fractional sloop built of West System sheathed strip planked Western Red Cedar has successfully undergone sea trials and is now happily moored in Blakely H
Built by Russ Sabia of Belmont, Massachusetts and donated to the 7 Lakes Alliance in Belgrade Lakes, Maine to help raise funds to support their land and water conservation efforts around the Belgrade Lakes.This solo canoe is 11′6″ with a 2′4″ beam and took approximately 120 hours to build.
Jerry and Cheryl Morrow wanted a canoe that could be easily portaged and carried in the back of a pick-up truck, so they modified this Chestnut Prospector canoe by cutting it in half. Each half weighs 42 pounds. GEMINI is strip-built of poplar strips with ash trim.
I’ve built 30+ boats as a hobby so I know enough to be dangerous. A few years ago someone decided I needed yet “another” project so they donated a 19402 era Chris Craft (I think) mahogany planked hull.
YOU can build your own 16 foot grand banks dory, from scratch, yourself using our step-by-step bo
Excellent condition and freshly painted, custom 16’ Amesbury Skiff 2003, Oak Frame, lapstrake ced
Beautiful boat once restored (2016) Unfortunately neglected since.
