Launchings

Asher Molyneaux built this kayak as a homeschooling project in winter/spring 2014. The frame is made of spruce, cedar and ash. The skin is ballistic nylon coated with two part urethane coating. The paddle is poplar.

Scotland Island, on Pittwater, a large body of water about 30 miles north of Sydney, Australia, is the home port of this 20' Oxford rowing shell designed by Chesapeake Light Craft.

Constant Camber construction. Main hull has inner/outer layers of 1/14″ fir, sandwiching two layers of cedar. Amas are three layers of fir. Started building 30 years ago!!

Thomas Mayenburg built this 12' 8" car-top Modified McInnis Bateau with his brother and a friend. The design is from John Gardner's Building Classic Small Craft, Vol. 2. They used 3/8" plywood on the bottom, and 3/8" red cedar strakes.

MALUHIA means safety, serenity, and peace in Hawaiian. She is a John Gardner designed Carolina Dory, 19′8″ x 8′6″. Russell Durler of Layton, Utah built her using Douglas fir and white oak, and launched her in July 2000.

This is the most recent of two Abenaki kits I have built (materials supplied by Newfound Woodworks of Bristol, NH). It was a joy to build and even more fun to paddle. My wife and I launched this canoe on Drakes Creek in Franklin, KY on October 10th, 2021. It tracked nicely was very stable.

I built “Arrow” from a CLC kit, designing my own pattern for the deck and redesigning CLC’s combing. It took six months to build and the experience was very impactful. I fell in love with this boat before I ever launched her and kayaking is now a renewed pleasure!

WREN was built on our patio in Chapel Hill, NC. It only took about 20 months longer then the 2 months I originally promised my wife. This was my first attempt at boat building and now I'm ready to leave my job as a nurse, head back to school, and figure out how to make a livelihood of it.

Launched 18 May, 2015 at Spruce Head, Maine. Fannie Salter is a 23′ Cedar Key Sharpie built to a modified Reuel Parker Design White pine on white oak with copper and stainless fasteners. She will be Cat Ketch rigged 172sq. ft. sail area 10.5′ oar.

Rod Wright’s version of the Barto 16′ melonseed (WB plan#120). She’s built of spanish cedar, sipo, ash and white oak; and sports a sail sewn 13from a Sailrite kit.