Launchings

After hours of searching through plans for a boat to build I figured the next best thing was to design my own. So working off the types of boats I liked I came up with C LEGS.Built from 6 mm ply glassed over she is strong and light.

Plans and plywood bought in 2000, then life got in the way. Retirement in 2018 removed all excuses and slow progress began in 2019. The covid lockdown provided the dedicated time needed for completion.

David Satter restored this 1931 Old Town Canoe in 2002, after paying just $100 for her at a yard sale in NJ. It is an Old Town 50-lb 15 model. He replaced 10 ribs and 30 feet of planking, and replaced the canvas; then gave her a new coat of paint and varnish.

Wood strip canoe. Seem more details at https://www.facebook.com/photo.php?fbid=678745992196255&set=a.591910930…

I launched my boat July 27, 2015, I started the build on December 4, 2014. I have 814 hours in the build. The boat performs very Well. I installed a new 70 HP Yamaha 4 stroke outboard with the command link instrument package. The boat reached 29 MPH at 6200 RPM. Getting 5.4 MPG of fuel.

Mark Babcock built a Phil Bolger 15' Diablo design, which he named LINDA MARIE. He writes "I built the hull of fiberglass over plywood as described in the plans but added oak seats and gunwales in place of the plywood called for in the book.

This Whitefin 22, powered by a 90 hp Evinrude, cruises about 25 knots with four adults aboard and has a top seed of 35 mph. Bruce Hansen constructed it from plans by John Gengler, using epoxy and plywood over mahogany frames.

Steve Batiste found the plans for this 'Corky' design on the website http://hometown.aol.com/polytarp/corky.htm . The article includes no citation to the builder or the designer.

After purchasing the plans in 2007, I didn't start building until 2012 when life, work, and materials lined up.

Ken Spring writes "Keith Matlack uses his 15'7" x 41" sharpie skiff, SQUALICORAX (Latin name of an extinct shark) for fossil hunting along the shores of the Chesapeake Bay.