This section of our web site, an extension of the Launchings department of WoodenBoat magazine, is dedicated to sharing news of recently launched wooden boats built or restored by our readers. If you’ve launched a boat within the past year, please email us at launchings@woodenboat.com, or post your news here.
(All posts are subject to approval and editing before being made live.)
To refine your search, add quote marks. If you search Wood Duck, you will get all the listings which include Wood and Duck. To refine, search “Wood Duck” and you’ll see just Wood Duck results.
The canoe came from a restaurant in Kansas where it hung from the ceiling. All the old fiberglass had to be stripped off and refinished, and the end stems rebuilt.
“The Fence” was donated to the Anacostia Watershed Society by teenagers Aaron and Alana Richards, and launched on July 17, 2013.The rowboat had its unusual origins as a project between next-door neighbors. The Fields/Richards and Batson/Eatons shared an aging fence in Takoma Park, Maryland.
I built my John Welsford designed Houdini cat yawl in my garage. It took almost five years. The boat is constructed of okoume marine plywood, douglas fir and mahogany. The multi-chine hull was built with sawn plywood frames and douglas fir stringers.
The Rosebud was strip-built of tamarack following the classic lines of the Columbia dinghy from WoodenBoat plans. The tamarack was harvested from two large trees on our Norwich, Vermont property in June, 2012 and construction started in late summer.
In Pawaukee, Wisconsin, Ric Sternkopf designed and built these two stand-up paddleboards and launched them last April. The boards are 18′ long, 26″ wide, and weigh 38 lbs. They are made of stitch-and-glued 3mm okoume and sapele plywood.
I was having difficulty getting out of my SOT kayak and needed a small skiff to row around the lake near my house. I wanted something I could put in the back of my S10 pickup, so I chose the Hannu 10 1/2 foot skiff.
FIRST TRY is constructed with yellow pine framing covered in a fiberglassed and gelcoated southern pine exterior plywood hull. The stem is ash tying into an oak keel with oak bottom rubbers. The chines, gunwale rubbers, coamings, windshield frame, etc are made of Honduran mahogany.
My name is Jessy Hintz from Louisville, CO. In the spring of 2020 my neighbor acquired a 16 foot unfinished cedar striped canoe hull of unknown design. The original outer fiberglass sheeting did not adhere.
Steve Lansdowne took several courses at WB school in the summers of 2000 and 2001.
NEMAH features a stable, flat bottomed, sharpie type hull that can handle up to 3 passenger
10’ rowboat with aluminum trailer. Full cover and oars.
Asking $2,000
GROOTE BEER, has been in the US in the past for many years.
