Plans & Kits

An inshore skiff for sails, oars, or electric propulsion.

Norwegian-influenced rowing/sailing craft designed for glued-lap plywood construction.
Constuction: Glued lapstrake plywood
No lofting is required.
Plans include 8 sheets.

NEMAH features a stable, flat bottomed, sharpie type hull that can handle up to 3 passengers and a small outboard up to 5hp. Sides are ¼” plywood and the bottom is 3/8” plywood. A trussed gunnel rail insures hull stiffness.

A series of Catamaran Houseboats/canal boats has been designed with electric propulsion.

The boats have been designed to meet dimensional restrictions of the french canal waterways, however the design can be easily adapted to other inland waterway requirements.

Mia was the second design that I published, a 12′ runabout, inspired in part by William Jackson's 1955 design for the “Ace” which was produced by the Sande Boat Works between 1956 and 1962 (www.sandeace.com), and in part by the 1950’s designs of Hal Kelly.Mia

The Milford 20 is a trailer-able shoal draft sharpie schooner modelled on the New Haven sharpies of the late 19th. century. It was inspired by Mark Fitzgerald’s FLORIDAYS design, as published in Reuel Parker’s Sharpie Book and featured in Watercraft Magazine.

We illustrate the spiritual and sociological reasons that led us to state in the MOSCHINO the ideal boat for many of us.

The Freedom series has gained back the turning ability found in traditional canoe shapes, without sacrificing the speed of the modern hull

This cozy pocket cruiser combines simple sheet-plywood construction with more than a touch of elegance.Her board-up draft of 1′6″ lets you explore secluded coves and is easy to haul with a trailer.Construction: Plywood planking over sawn frames.Lofting is required.Plans include 6 sheets.

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick.