Motorboats - Outboard
Compass Skiff
Easy To Build | Cartoppable | Build With The FamilySpecifications:
- LOA 9′ 6″
- LWL 8' Beam 49″
- Draft 3″
- Depth amidships 17 1/2″
- Power 6 hp outboard
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Easy To Build | Cartoppable | Build With The FamilySpecifications:
A simple and seaworthy V-bottomed centerboard cruiser with accommodations for two.
Construction: Plywood planking over sawn frames
Lofting is required
Plans include 10 sheets.
Fast / Lightweight / Easy-to-BuildSpecifications:
A thoroughly charming boat from the board of a highly respected designer, Eel exudes strength of character.
Construction: Strip, cold-molded, or carvel.
Alternative construction: Lapstrake.
Lofting required.
Plans include 4 sheets
Our pre-cut kits have been cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is included with the kit.
“Breeze” is a 10′ (3m) double paddle canoe. Two sheets of plywood needed. Stitch and glue construction using 3″(75mm) fiberglass tape in epoxy for all seams inside and out. The deciding factors when designing the boat were mostly the same as with all my designs - seaworthiness and lightweight.
Construction: Glued lapstrake plywood.
Alternative construction: Traditional plank, cold molded and strip plank.
No Lofting required.
Plans include 10 sheets.
If you enjoy rowing and need a boat which can be built quickly, doesn’t cost much, and is easy for transportation and storage then this tiny vessel might be for you. “Mighty Mouse” is the adult version of our one sheet mini punt “Mickey Mouse”.
The Clyde one-design 20-tonners as they were known were very popular and described by the Yacht Racing on the Clyde review of 1899 as "able and comfortable at sea, fairly speedy on the race course...
17' 9" glued lap strake sapele plywood with ribbon Sipo mahogany bright work.
Mahogany planked on oiled oak frames. Spruce spars and stainless rigging.
SUNDANCE II "Colonia" sailing dinghy designed in 1901 by Nathanael G. Herreshoff.
Restored in ME by Jonathan Minott (seen in WB "Launchings" July/Aug 2009).