Oar / Paddle
F1430 Fishing Kayak
The F1430 is a unique sit-on-top stitch and glue kayak.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
The F1430 is a unique sit-on-top stitch and glue kayak.
NWP XL is a very low drag touring kayak for paddlers weighing 180-250 pounds. Built from 4mm plywood in a garage, you can build two for the price of one kit with these plans. Weigh less? see NWP.
The Workstar 17 concept of plywood/epoxy boat building was the result of a co-operation between Working Boats UK Ltd and Humphreys Yacht Design, which enabled people with no experience in building boats to put together, from a comprehensive kit of profiled parts, epoxy and FRP tape, a Workstar 17
The Sponge Docks Skiffs are designed for first-time builders, due to their simple stitch and glue assembly, yet on the water these good looking boats are versatile, stable and dry.
Everyone from Louisiana seems to remember that cypress pirogue boat Pawpaw kept in his barn. Cypress pirogues have since become a relic of the past. Pirogues are flat bottom boats designed to paddle shallow swamps and marshes.
An open shoal-draft centerboarder suitable for rowing, daysailing, or coastal cruising.
Construction: Carvel planked over steamed frames
Alternative construction: Lapstrake, strip, or cold-molded
Lofting is required
Plans include 3 sheets.
Kingfisher’s shape was inspired by famous Chestnut Prospector. Hull width of 93cm, flat bottom and slim shape gives good stability and maneuverability. It is designed for crew of 2 with additional equipment (tents, fishing rods…).
The input was “design a pure cruising boat”.The boat has wide internal volumes, limited draft, average/high displacement and sailing area which do not require a continuos sail change.The hull lines have been developed both to corner and round.We wanted to realize something new for deck design.
Complete with spars and sails. Lying Cape Cod. Last restored c1970. Cockpit and deck are newer.
Lord Nelson Royal Navy 1798 pattern Pinnace. Pine on oak. Length 28.5 feet. Needs few repairs.