Sailboats - Daysailers
Whilly Tern
Construction — Glued lapstrake clinker plywood. No Lofting required. Plans include 5 sheets with instructions. Sail Area — Lug 83 sq. ft. Sloop 95 sq. ft.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Construction — Glued lapstrake clinker plywood. No Lofting required. Plans include 5 sheets with instructions. Sail Area — Lug 83 sq. ft. Sloop 95 sq. ft.
Comfortable round-bottomed ocean cruiser with carvel-planking and accommodations for two.
Construction: Carvel planked over steamed frames
Alternative construction: Cold-molded or strip
Lofting is required.
Plans include 9 sheets.
The Mini Skeeter was made primarily as a fun leisure iceboat that I could use on smaller lakes. The goal I was aiming for is a small, comfortable, warm iceboat that looks elegant. The fuselage is about slightly more than10′ long. The beam is 82″.
"PocketShip" is a small cruising sailboat of refined model, meant to sail well on all points, provide dry camping accommodations for one or two adults, and tow behind a four-cylinder car.
The Shearwater Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck.
An ultralight solo pack canoe weighing in at 26 lbs. Carry the boat in one hand, your paddle in the other.
Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is now included with the kit.
Commuter style launch with diesel inboard and a small cabin.
A comfortable small cruising boat with berths for either two or four and an alternate schooner rig.
Construction: Carvel planking over steamed frames
Lofting is required.
Plans include 10 sheets.
NWP is a very low-drag touring kayak intended for paddlers weighing 150-200 pounds. Built from 4 mm plywood, in a garage, you can build two for the price of one kit! Heavier? try NWP XL.
This 16' x 21" [4.9m x 53cm] strip planked kayak is adapted to comfort and responsiveness in acti
This 17' x 20" [5.2m x49cm] strip planked kayak is designed for comfort and speed in rough water.