Plans & Kits

Didi 40cr radius chine plywood cruiser/racer

“Trixie” began as an idea for a small and simple to build plywood tender, able to get out to a mooring with two or three on board, that was very light, incorporated wheels to enable transport to the slipway, was designed to provide the maximum space from two sheets of 1/4″ plywood, and could be p

Techne is a pure double trapeze skiff, fast, exciting and for amateur boat building.

Full-sized patterns for molds, so lofting is not required. Construction: Carvel-planked over steamed frames. Alternative construction: Lapstrake or strip. Plans include 4 sheets.

The Sparrow Hawk is proportionally downsized for the smaller paddler.

A fast and able auxiliary cruiser with wheel steering and accommodations for three.

Construction: Carvel Planked over steamed frames.

Alternative construction: Cold-molded or strip.

Lofting is required.

Plans include 5 sheets.

Bedard Yacht Design’s Ozona X Nesting Pram evolved from the hugely popular Ozona Pram and a significant demand from cruisers for a nesting dinghy, slightly larger.

Hyak is a single kayak designed for multi-day excursions and recreational racing.

10′ x 3′8″ Double Ender Dinghy.Designed for paddling, rowing or sailing and for construction in laminated wood or fiberglass.Able to carry on car top as canoe or on boat deck as yacht tender.Seats three and has two rowing stations.Uses two removable leeboards and rudder-tiller combination for sai

Based loosely on the Folkboat, this plywood lapstrake double-ender combines comforting rough-water ability, and good looks.

Construction: Lapstrake plywood over laminated frames.

Alternative construction: Traditional plank on frame, strip or cold-molded.