If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here.
There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Small enough to load on top of a car, but large enough to seat two adults...
The Duo is a simple to build 3m (10ft) hard chine rowing and sailing dinghy that can be built from just two sheets of 4mm (3/16in) plywood. It is also available as a nesting dinghy, so it can be stored on a cabin roof or even in the back of a car.
Accomodates 2-4 for daysailing, and has a small cuddy cabin. Construction: Carvel Planked over sawn frames. Alternative construction: Strip, or strip bottom with plywood sides. Lofting is required. Plans include 7 sheets.
This boat, with a LOA of 8 mt,develops an internal volume such as to allow 6 crew members a sailing cruise.The hull lines and deck lines are to corner for simplicity of construction, and are harmonized with the hull volume.
‘Volare’ comes in two versions. This is the utility version, the console version is available as a separate set of plans. They’re both 15′4″ long and 5′ wide.Her length is that of two sheets of 8′ plywood and she’s built in two halves (bow end and stern end).
The Headwater Fourteen [H-14] was designed and the prototype built in the Summer of 1985 to test the viability of using frameless, stressed skin construction to build a serviceable Whitewater drift boat.
Construction — Glued lapstrake clinker plywood. Alternative construction —Traditional plank, cold molded and strip plank. No Lofting required. Plans include 7 sheets with instructions. Sail Area — Lug 65 sq. ft. Sloop 84 sq. ft. Yawl 81 sq. ft.
You can enjoy paddling easier and funnier with less budget because it’s made of plywood, sectional and you can build one in a week.
Lapstrake is a forgiving building method. The overlapping spruce planks allow for a little error when installing, which gives the classic canoe an extra layer of peace of mind when you’re on the water.
The T*Boat is a Wood / Plywood / Resin structure. The T* comes in 2 Versions. The T*5 is a one person version and the “Coming Soon” T*Six is a 2 person version. The T*5 can be built from scratch using our Drawing and Instruction Package. Or it can be built using the T*5 Kit.
One is 42 x 96 inches for $125 the other is 62 x 92 inches for $175
Cedar plank and mahogany boat built in 1950 number 12021.
Piccolo model professionally built by George Bullitt.
"ECHO", Historic and gorgeous 1965 Friendship Sloop, FSS #54.
