Plans & Kits

Didi 40cr radius chine plywood cruiser/racer

The Coot is a handy little yacht tender with a lot of capacity.

8 plank stitch and glue canoe.

First launched in 2000, the Atlantic 17 is a double-ended, modified dory designed for one or two rowers.

This V-bottomed daysailer can be shallow or deep drafted and is easily sailed.

Construction: Batten-seam planking over steamed frames

Alternative construction: Plywood

Lofting is optional.

Plans include 6 sheets.

“Breeze” is a 10′ (3m) double paddle canoe. Two sheets of plywood needed. Stitch and glue construction using 3″(75mm) fiberglass tape in epoxy for all seams inside and out. The deciding factors when designing the boat were mostly the same as with all my designs - seaworthiness and lightweight.

Shallow-drafted V-bottomed cruiser with cross-planked bottom & berths for three. Construction: Carvel planked sides over sawn frames; cross planked bottom. Alternative: Strip-planked topsides. Lofting is required. Plans include 7 sheets.

A roomy auxiliary sloop in a small package.
Construction: Carvel planked over steamed frames.
Alternative construction: Cold-molded or strip.
Lofting is required.
Plans include 11 sheets.

Light displacement boat, that resume classic water lines into a modern conception.

Wynfall is a small but capable cruising boat -- although only 26' long, she has a waterline of almost 24', and displaces 9500 lbs.