Plans & Kits

Didi 34 radius chine plywood cruiser/racer

Tom Cat is a shoal draft catboat of plank-on-frame construction, but strip construction would do as well.

Lofting is required.

Sail area is 120 sq. ft.

Plan includes 9 sheets.

The CS25 is an offshore boat based on the Carolina Sport Fishing boats lines.

The Eureka is a pretty, simple to build plywood canoe built in stitch and glue, (44lbs down to 34) and paddles nicely. Very comprehensive plans - a boatbuilding course in a book.

Stable, easily handled family daysailer with a lead ballast keel. Construction: Carvel planked over steamed frames. Alternative construction: Cold-molded or strip. Lofting is required. Plans include 9 sheets.

We designed a simple to build work boat with a vee-hull based on a proven work boat type, the Panga.

The 16' Prospector features a flattened, shallow arch hull with its fullness carried into the bow and stern, good depth amidships to maintain freeboard and deepened ends to keep paddlers and gear dry.

The SILVER 333 is a very small classical runabout for one or two people which may easily be transported on top of a mid-size car roof. Maximum suggested power of the motor is 15/20 HP, which is sufficient for planing.

Interested in building your own boat? Cape Fear Museum in Wilmington, NC sells Simmons Sea-Skiff boat plans in 18′, 20′ and 22′.Thomas Norwood Simmons was born in 1908 in Wilmington and lived most of his life on Myrtle Grove Sound. He was a carpenter by trade.

Light displacement boat, that resume classic water lines into a modern conception.