Plans & Kits

The Lobster Boat 26 (LB26) is a plan for amateur builders like no other!

Very simple workboat for outboard motor power. Suits 8 to 30 hp motors,carry up to six persons, can be built longer or shorter as required.

This beautiful 11′ 2″ dinghy is similar in construction to the Nutshell Pram, although it is slightly larger, with a pointed bow.Construction: Glued-lapstrake plywood.Alternative construction: Traditional lapstrake.No lofting is required.Plans include 5 sheets.

A stable (28 1/2″ beam) strip-built touring kayak.

Planked up with 1/4″ cedar strips.

Construction: Strip planked.

Lofting is required.

Plans include 4 sheets.

The TRICKY FIVE has been conceived for a precise scope: to realize a boat, which in relation to its size would maximize the ratio between speed and cost. This means that for a determined cost for materials and hours of construction required, it would be the fastest possible.

In the spring of 2013, I started to write a book called, How to Design a Boat using SketchUp 3D Software. The subject matter was my design, ‘Kalostyn’.

V-bottomed cruiser designed for plywood construction with accommodations for two and inside ballast.Construction: Plywood planking over sawn frames.Lofting is required.Plans include 11 sheets.Please note: gaff rig version’s mast measurements are taken by scaling from the plans.Notice the below de

The plan has been designed according to the regulations of the class “10 feet”. So was born a simple, light and very fast plan.Start 30 has a double life.

Scherzando is a 12'10'' open canoe. The construction technique is a wooden basquet whith a canvas skin coated with epoxy or polyester. The plans include 7 station moulds, bow and stem at full escale.

THALAS 13' draws inspiration from the Whitehall, the most classical American row boat of the XIX century but, thanks to the modern construction techniques, is much lighter and has different hull lines