Plans & Kits

Centennial Spray 38

“Breeze” is a 10′ (3m) double paddle canoe. Two sheets of plywood needed. Stitch and glue construction using 3″(75mm) fiberglass tape in epoxy for all seams inside and out. The deciding factors when designing the boat were mostly the same as with all my designs - seaworthiness and lightweight.

The Shearwater Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck.

Minimum size ocean voyager

The Sail kit allows you to transform the canoes NINFA, NAIADE and ONDINA, in small sailing trimarans for coastal cruising with minimal efforts.

A narrow beam and shallow arch hull make the Canadien ideal for general-purpose paddling and light tripping.

The idea was a boat that handles like a good racing dinghy, but is much easier to store and transport. Rooftop.

Designed for strip-planking, the Controversy 36 features light displacement and good headroom, with light and open space throughout.

Construction: Strip-planked over bulkheads and frames

Lofting is required.

Plans include 16 sheets.

The AC 75 Evolution design input was to crate a trailerable boat with a small displacement, building with traditional materials such as wood. Another request was to have a comfort and an interior volume typical of larger size boats. We have modified the deck lines to achieve these results.

Construction: Glued lapstrake plywood.

Alternative construction: Traditional plank, cold molded and strip plank.

No Lofting required.

Plans include 10 sheets.