Plans & Kits

COASTWORKER 30 Build in steel or aluminum

Designed by John C. Harris, this light but sturdy fishing and utility skiff—a “crab skiff,” as they’re known on the Chesapeake Bay—has been dubbed the “Peeler” after the Chesapeake slang for a local delicacy, soft-shell crabs.

Build the Babson 14 from scratch! Plans include three variations on the hull: sheet ply (like our kits), glue-lap-ply, power, suitable for up to a 2 horsepower outboard.Plans contain 16 sheets of drawings, full-sized mold patterns so no lofting is required (no offsets are included with the plans)

Construction - Glued Lapstrake clinker plywood. No Lofting required. Plans include 5 sheets with instructions. Sail Area - 67 sq. ft.

Safe, seaworthy, shoal-draft double-ender, with a flat bottom and centerboard. Lofting is required. Plans include 4 sheets.

This 17' x 20" [5.2m x49cm] strip planked kayak is designed for comfort and speed in rough water. With a lot of capacity for gear, it can be used as an efficient expedition vessel while being fast, quick and fun as a day tripper. It will excel at downwind runs.

This is a centerboard cruising boat for couples and small families. Lightweight and strong, it can be easily hauled with a trailer. Construction: Plywood topsides over bulkheads and stringers; strip planked bottom Lofting is required. Plans include 6 sheets.

The Mini Vee is a simple-to-build v-bottom racing boat designed for APBA Mini GT and GT Pro racing. Also an excellent high-performance boat for the non-racer and a great boat building project for an individual or the whole family.

Spray 52 is available as a Wood / Epoxy plan and full size frame patterns.

The Hanze Yawl was designed some years ago during a course on lofting at the Bootbouwschool in the Netherlands.Bert van Baar, the owner of the school was very pleased about a Swedish design he had build previously in a project on the streets of Old Amsterdam.