Plans & Kits

7.5m Racing Tri built in ply

The Start 42 is designed to sail very very fast as a 14 ft international.

The T*Boat is a Wood / Plywood / Resin structure. The T* comes in 2 Versions. The T*5 is a one person version and the “Coming Soon” T*Six is a 2 person version. The T*5 can be built from scratch using our Drawing and Instruction Package. Or it can be built using the T*5 Kit.

Construction — Glued lapstrake clinker plywood. No Lofting required. Plans include 5 sheets with instructions. Sail Area — Lug 83 sq. ft. Sloop 95 sq. ft.

An open shoal-draft centerboarder suitable for rowing, daysailing, or coastal cruising.

Construction: Carvel planked over steamed frames

Alternative construction: Lapstrake, strip, or cold-molded

Lofting is required

Plans include 3 sheets.

LYS stands for Lumber Yard Skiff. These rugged flat bottom work skiffs were originally designed to be built using materials readily found in most lumber yards- underlayment plywood and spruce framing.

Tolman Skiffs are thoroughly modern, ocean capable, vee bottom stitch and glue plywood boats with a dory ancestry. These skiffs are designed for Alaskan waters and are ideal for sport fishing, beach camping, cruising and general work or recreation.

As featured in WoodenBoat issue #274, the Tombolo 28 is an iconic modern classic outboard-powered cruiser. The mission of the design dictates a maximum length under 30′ and a trailerable beam.

Light, elegant double-paddle canoe for glued-seam lapstrake construction.Can be built 12′, 13′ 7″, or 15′ 2″ from the same set of plans.Construction: Glued lapstrake plywood.Alternative construction: Traditional lapstrake, cold-molded or strip.No lofting required.Plans include 5 sheets.

This 24' Australian design provides three arrangements to choose from-a small cuddy, or two cabin styles.

Construction is plywood with a single hard-chine.

Construction: Plywood planking over sawn frames.

Alternative construction: Strip.

Lofting is required.