Plans & Kits

singlehanded skiff

Athey is a 15' open water recreational rower for one or two based on a lines sketch by N. G. Herreshoff. Built from 4, 6 and 9mm glued lapstrake plywood, she weighs just 65 pounds and is cartopped.

The Shearwater is an eye-catching, light and fast cruiser that does many things well. It is a strong contender for the budget-minded paddler looking to answer the 'if I could only have one kayak' need

A roomy auxiliary sloop in a small package.
Construction: Carvel planked over steamed frames.
Alternative construction: Cold-molded or strip.
Lofting is required.
Plans include 11 sheets.

A versatile 4-metre open utility / runabout for river and inland lake use, built in taped-seam plywood.

High performance beach cat which is striking to look at and exciting to sail. Well-detailed plans of simple and rugged stitch-and-glue plywood hulls.

Construction: Stitch-and-glue plywood over bulkhead frames.

No lofting is required.

Plans include 2 sheets.

This is a design for the 2.4mR class. The measurement formula is the same as for the bigger sisters like the famous 12mR yachts once used for the Americas Cup. As the down-scaling would leave the boat with to little righting moment there has been some adjustments to take care of this.

This is a boat simple to build, economical to use and that has a minimum of habitability and a lot of deck space for outdoor living.The construction method is the “stitch and paste” because of its small size.The hull is in CPM 10 mm thk.

Based on Tom Gillmer and Iver Franzen’s New Moon (an enlargement on Gillmer’s Blue Moon), this sailing vessel is intended to be a stout, seaworthy, offshore-capable passagemaker, with an emphasis on the balance between comfortable sea-keeping and good sailing abilities.

The i550 is a fast modern sharpie type hull shape owing its roots to the historic sharpies of Long Island Sound. The sharpies were known for their speed and seaworthiness, the i550 picks up where they left off.