ADVERTISEMENT

Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

834 results for All Boat Plans & Kits

Imp

Designer: 
Glen L Marine
Skill Level to Build: 
beginner

A 10' Flat Bottom Powerboat/Rowboat

Lion 600

Designer: 
Unik Yachts

600 Lion Yacht project despite its small size, has a spacious interior, and allows you to comfortably make trips to the inland waters and coastal seas.

The yacht can be easily transported on a trailer behind a car, and it opens up the...

Garvey 33

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate

LOA: 33′ 1″
LBP: 32′10″
LWL: 26′ 8″
BEAM: 10′ 0″
DRAFT: 2′ 3½″/5′ 3½″
DISPLACEMENT: 9,000lbs (approx)
BALLAST: 2,000lbs lead under the settees.
1,000lbs additional lead for trim.
SAIL AREA: 388 sq. ft....

Shearwater Sectional Sport

Designer: 
Eric Schade
Skill Level to Build: 
Beginner/Intermediate

Developed by Chesapeake Light Craft, LLC, with designer Eric Schade, the 14′6″ Shearwater Sectional is a performance-oriented kayak that successfully bridges the gap between high performance, comfort, and stability. Spin loose five bolts at the...

Quattro 16

Designer: 
Woods Designs
Skill Level to Build: 
basic

a 16ft ply/epoxy beach cat available as plans from the designers or from Wooden Boat magazine

18' 6" Garden's Eel

Designer: 
William Garden
Skill Level to Build: 
Intermediate to Advanced

A thoroughly charming boat from the board of a highly respected designer, Eel exudes strength of character.

Construction: Strip, cold-molded, or carvel.

Alternative construction: Lapstrake.

Lofting required.

Plans...

32' Lobstercruiser

Designer: 
Alan McInnis
Skill Level to Build: 
Advanced

Round-bottomed, carvel-planked powerboat with two berths and a single 300-hp engine.

Construction: Carvel planked over steamed frames.

Alternative construction: Strip or cold-molded

Lofting is required.

Plans include...

PUCK 550

Designer: 
Paolo Lodigiani
Skill Level to Build: 
intermediate

The PUCK reflects the spirit of the original class which was to create a boat used in regattas but also suitable for coastal cruising, easy to carry and inexpensive.
All of these features are found in PUCK, a boat comfortable and stable,...