If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
The GYPSY 28 was the Woods Designs’ own cruising boat for five very successful years. It was designed as an easy-to-build budget ocean cruiser and many are now sailing in all corners of the world.
Easy to Build Flat Bottom Skiff 18 ft Instructions also Include Our 14 Ft Smaller Version
This charming addition to our cradle boat fleet is adapted from a type known as a pram. Prams have transoms at both bow and stern, and are used extensively as tenders for larger vessels because of their roominess in a relatively short length.
This design has a built-down keel to provide a deeper bilge, a centerboard housed entirely within the ballast keel, and a straight sheer.
Construction: Strip-planked over bulkhead / frames
Lofting is required.
Plans include 8 sheets.
SPRAY 36 - Wood Epoxy - Gaff rig - Bermudian rig - Junk rig
NAIADE is a little bit shorter than classical sea kayaks but it is perfectly suitable for pleasure trips in calm waters, under safe conditions, even for amateur paddlers.
Virginia Park is an elegant lapstrake launch. Featured in WoodenBoat #234, Sept. – Oct. 2013, Virginia Park is built in the glued lapstrake method with steam bent frames.
This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick.
Redwing- a gentle, shoal-draft, low-powered
(5 to 10-hp), sheet-plywood outboard cruiser - can live on her trailer.
Whenever you wish, she'll be ready to go exploring.
14' 4" Ben Garvey Skiff designed by Doug Hylan and built by master boatbuilder Matt Elwell at Hyl
"Jack Tar" custom designed and built of white oak, mahogany and teak in 1961 is for sale for a "t
“Ruby Slipper” Goat Island Skiff, designed by Michael Storer. 6mm Okoume plywood hull.
