Plans & Kits

Kingston 15, A personal weekender for 2.

This hypnotically striking canoe yawl ranks among the most admired designs of our time.

Construction: Carvel-planked over steam-bent frames

Alternative construction: Cold-molded

Lofting is required

Plans include 9 sheets

Badger gained widespread fame as the subject of the book Voyaging On A Small Income. The concept of this design was to use the basic interior accommodation plan that worked so well on the 34′ Topsail Ketch Sunrise, which was evolved and improved on during the decade that I lived aboard her.

Tandem Row & Sail | CartoppableSpecifications:

• Overall Length 14′ 4″
• Waterline Length 10′ 10″
• Beam 48 1/2″
• Draft (board up/down) 5"/27″
• Depth amidships 14 3/4″
• Bare hull weight 115 lbs

The Crystal 16 was designed to be a simple, lightweight flats skiff. Her hull is a simple V-bottom with a bit of flare in her topsides. Her deck features a large casting platform forward with two smaller platforms back aft on both sides. Storage is available up forward below the casting deck.

Beamier, but no less elegant than the Wee Rob, this more stable double-paddle canoe can carry sail better.Any of the three lengths (13′ 6″, 15′ 8″, or 17′ 3″) can be built using the same plans.You’ll notice the different stem patterns on plans page 5...

Rugged, simple, stable, and economical to build, the Lumber Yard skiffs are based on traditional New England flat bottom work skiffs.

4.80 m Plywood stitch & glue touring canoe. Only two plywood sheets are needed!

An outboard skiff with a wide bottom and moderate rocker that contribute to stability and the ability to carry weight back aft.

• Construction: Cross-planked bottom, lapstrake sides
• Alternative construction: Plywood or glued-lapstrake plywood
• Lofting is required

Construction: Glued lapstrake plywood. Alternative construction: Traditional plank, cold-molded and strip planked. No Lofting required. Sail Area : 30 sq. ft. Plan includes 6 sheets.