Plans & Kits

Wood strip/epoxy plans and kits

Buckley Yacht Design have increased the size of the kit boat which is on offer. This 39′ Catamaran is the largest kit boat in the portfolio.

Trailerable cruising catamaran

The plans and construction manual for the plywood International 110 are available to any class member for use to build new or rebuild and restore an older boat.

These handsome, practical row boats were routinely built by Nova Scotia shipwright, Jim Smith in six days, painted and ready for the water.

This is a boat simple to build, economical to use and that has a minimum of habitability and a lot of deck space for outdoor living.The construction method is the “stitch and paste” because of its small size.The hull is in CPM 10 mm thk.

Keel/centerboard cutter designed by Edward Burgess in 1888 and first of his “Compromise 40-footers”.The plans produce a model that is 25″ long.You’ll receive 4 pages of plans historical information about the boat and step-by-step instructions for half-hull building,using the lift method.There are

Rugged carvel construction, round bottomed. Driven by a small inboard. Construction: Carvel planked over steamed frames. Alternative construction: Cold-molded, Strip. Lofting is required. Plans include 3 sheets.

Glued-lap plywood rowing or sailing tender with plenty of capacity. Construction: Glued lapstrake plywood. No lofting required. Plans include 5 sheets.

Even if it does not show, GIORMAX is a classical boat as it is a replica of an Italian boat which was popular in the nineteen-thirties.