Plans & Kits

The CS23 is an offshore boat based on the Carolina Sport Fishing boats lines.

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick.

The Milford 20 is a trailer-able shoal draft sharpie schooner modelled on the New Haven sharpies of the late 19th. century. It was inspired by Mark Fitzgerald’s FLORIDAYS design, as published in Reuel Parker’s Sharpie Book and featured in Watercraft Magazine.

The Mini Skeeter was made primarily as a fun leisure iceboat that I could use on smaller lakes. The goal I was aiming for is a small, comfortable, warm iceboat that looks elegant. The fuselage is about slightly more than10′ long. The beam is 82″.

Rustica 570 is a cabin motor boat ideal for coastal cruising and camping. It’s particularly suitable for river tourism in protected waters. The shallow V hull, semi-displacement, is designed for an outboard motor hosted inside the cockpit with a power range between 10 HP and 15 HP.

The flat-bottomed skiff can be both the most and least refined craft afloat.Popular by their ease of construction.Construction: Plywood planking over bulkhead frames.Alternative construction: Cross-planked bottom, planked sides (details included).Lofting is required.Plans include 5 sheets, and in

The sharply raked stem and well shaped forward sections will provide increasing buoyancy as the Endeavour punches into large waves.

Mia was the second design that I published, a 12′ runabout, inspired in part by William Jackson's 1955 design for the “Ace” which was produced by the Sande Boat Works between 1956 and 1962 (www.sandeace.com), and in part by the 1950’s designs of Hal Kelly.Mia

10′ x 3′8″ Double Ender Dinghy.Designed for paddling, rowing or sailing and for construction in laminated wood or fiberglass.Able to carry on car top as canoe or on boat deck as yacht tender.Seats three and has two rowing stations.Uses two removable leeboards and rudder-tiller combination for sai

New Lion 800 is a continuation of a series of plywood yacht designed by the company Unik Yachts.

The main idea of a series of yachts Lion is to maximize the manufacturability of the design and the ability to self-built yacht from a kit of parts cut on the CNC machine.