Plans & Kits

9 foot wooden catamaran

Concept: The CCSF25 is a high performance offshore fishing and family boat, she has a classic running surface of 24 degree deadrise and 8.5' max beam. Wide chine flats for knocking down spray, integrated lifting strakes for high speed handling and directional control.

Glued-lap plywood rowing or sailing tender with plenty of capacity.

Construction: Glued lapstrake plywood.

No lofting required.

Plans include 8 sheets.

The T*Boat is a Wood / Plywood / Resin structure. The T* comes in 2 Versions. The T*5 is a one person version and the “Coming Soon” T*Six is a 2 person version. The T*5 can be built from scratch using our Drawing and Instruction Package. Or it can be built using the T*5 Kit.

This Bear Mountain design is an efficient wilderness canoe that has proven exceptionally seaworthy.

Pathfinder is a big, classic, stable daysailer with space on board to set out two airbeds and sleeping bags on a flat floor, designed for home boatbuilders she is an exceptional performer under sail.

Like many traditional canoes, the Sassafras 16 is symmetrical, bow and stern. This allows a solo paddler to sit facing backwards on the forward seat for better trim. An elegant lapstrake canoe for two

A modified V-bottom, with constant deadrise in its after sections. Construction: Plywood and Mahogany over sawn frames. Alternative construction: Cold-molded, double laminated plywood. No lofting is required. Plans include 8 sheets.

This is a simple 8ft stitch and glue sail/row pram. It requires only 3 sheets of marine plywood and should be very fast, easy, and inexpensive to build. It should end up just over 80lb so easy to transport as well.

The Hanze Yawl was designed some years ago during a course on lofting at the Bootbouwschool in the Netherlands.Bert van Baar, the owner of the school was very pleased about a Swedish design he had build previously in a project on the streets of Old Amsterdam.