Plans & Kits

Shoal-draft voyager

17'
Plan #400-141

Construction — Glued lapstrake clinker plywood. Alternative construction —Traditional plank, cold molded and strip plank. No Lofting required. Plans include 7 sheets with instructions. Sail Area — Lug 65 sq. ft. Sloop 84 sq. ft. Yawl 81 sq. ft.

British plank-on-edge cutter designed by George L.

Wantoo is a foldable and trailerable proa with accommodation for 2 or 3 sailors. It is minimum weight (700 kilo), minimum costs (€ 24.000,-), maximum speed and maximum fun to sail.

Construction - Glued Lapstrake clinker plywood. No Lofting required. Plans include 5 sheets with instructions. Sail Area - 67 sq. ft.

Nice little cradle boat with rocking option. For more information please visit the website and look under portfolio/small boats

A simple and seaworthy V-bottomed centerboard cruiser with accommodations for two.

Construction: Plywood planking over sawn frames

Lofting is required

Plans include 10 sheets.

The main priorities which lie at the base of the DP 14' design are: simplicity of construction, user friendliness (for single or double crew) and good performance - all of this with reasonable costs.

“Trixie” began as an idea for a small and simple to build plywood tender, able to get out to a mooring with two or three on board, that was very light, incorporated wheels to enable transport to the slipway, was designed to provide the maximum space from two sheets of 1/4″ plywood, and could be p