If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here.
There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Simple sheet plywood sports rowing boat, stitch and tape construction. As easy to build as it gets!
YOUNG BAGGIE, with a hull length of 4 m, is the medium size of the three boats we designed drawing inspiration from the traditional sandbaggers.
A shoal-draft, two-sail bateau from the Chesapeake - comfortable cruising for a couple and a daysailing party.
Construction: Traditional Chesapeake bateau construction.
Lofting is required.
Plans include 7 sheets.
Bow and stern of English traditional narrowboat. Cutting files to produce a kit of steel parts for assembly. The midsection is a parralel box that can vary between 20 and 40ft. The midsection is produced by folding steel plate then adding the bow and stern.
An open boat that rows with ease and swiftness and is stiff enough under sail to stand up to a breeze.
Construction: Carvel planked over steamed frames
Alternative construction: Lapstrake or strip
No lofting is required
Plans include 6 sheets
A fast daysailer of stitch-and-glue plywood construction. Dismantles for cartopping. Deep V-hulls, no centerboard. Construction: Stitch-and-glue plywood over bulkhead frames. No lofting required. Plans include 3 sheets.
MIA is a 12 foot runabout, Her design is inspired by William Jackson's 1955 design for the 'Ace' which was produced by the Sande Boat Works between 1956 and 1962 (www.sandeace.com).This design differs from those of the period in that it is to be constructed i
An 18' daysailer/beach cruiser available in multiple configurations: gaff sloop or balanced-lug yawl rig; traditional plank-on-frame, glued lapstrake, or cold-molded construction; keel or centerboard
Keel/centerboard cutter designed by Edward Burgess in 1888 and first of his “Compromise 40-footers”.The plans produce a model that is 25″ long.You’ll receive 4 pages of plans historical information about the boat and step-by-step instructions for half-hull building,using the lift method.There are
24′ Chesapeake Bay Hampton FlattieL.O.A.: 24′ 2″L.W.L.: 22′ 8″Beam: 7′ 9″ Draft: 2′ ½″/3′ 9″Sail Area: 263 sq ftWeight: 2,500# (approx)Proportionately, this is the largest sharpie type known, and shows the maximum beam ratio successfully used in the sharpie type.
1928 Vic Frank Sea Queen — 30ft Classic Pacific Northwest Wooden Cruiser
KESA is a modern 17' LOA Cape Split peapod based on the Cape Split peapod design at Mystic Seapor
