Plans & Kits

Didi Mini radius chine plywood Mini 650 racer

A trim, rugged, carvel-planked cruiser with simple accommodations for two and a choice of gaff or marconi rig.Construction: Carvel planked over steamed framesAlternative construction: Cold-molded or strip Lofting is requiredPlans include 7 sheets

This is a centerboard cruising boat for couples and small families. Lightweight and strong, it can be easily hauled with a trailer. Construction: Plywood topsides over bulkheads and stringers; strip planked bottom Lofting is required. Plans include 6 sheets.

Light, elegant double-paddle canoe for glued-seam lapstrake construction.Can be built 12′, 13′ 7″, or 15′ 2″ from the same set of plans.Construction: Glued lapstrake plywood.Alternative construction: Traditional lapstrake, cold-molded or strip.No lofting required.Plans include 5 sheets.

The Flats Stalker is a simple but rugged and easy to pole boat designed for hardcore skinny water sight fishing.

DragonFlyer 3.2 is a great boat for all ages to build. We built the first boat, Zip, with our four kids, then aged seven to twelve and they all had a great time and learned along the way.

An oceangoing auxiliary cruiser featuring stout but simple carvel construction.

Construction: Carvel planked over steamed frames

Lofting is required

Plans include 5 sheets.

This design was inspired by Ross Lillistone’s “Water Rat”. The bow transom was replaced by a pointed stem. Also the internal volume and from there the displacement of the boat were increased by about 20%. Changes were made to the seating arrangement as well.

We designed a simple to build work boat with a vee-hull based on a proven work boat type, the Panga.

Austral’s design is an outgrowth of my 26' Wynfall design, intended to provide additional space below decks, including standing headroom. She is slightly heavier, longer and wider, and has more freeboard than her smaller sister.