Sailboats - Daysailers
KIS 4.2S
We designed KIS dinghies in order to meet a very practical need of amateur boatbuilders.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
We designed KIS dinghies in order to meet a very practical need of amateur boatbuilders.
Construction - Glued lapstrake clinker plywood. No Lofting required. Plans include 7 sheets with photocopies of Classic Boat building series. Sail Area - 67 sq. ft.
Norwegian-influenced rowing/sailing craft designed for glued-lap plywood construction.
Constuction: Glued lapstrake plywood
No lofting is required.
Plans include 8 sheets.
At 14 feet this is Riva’s only outboard powered design. Originally designed in the 1950s, only some 150 were ever produced.
An entry-level sliding-seat pulling boat. Provides rewarding speed in an easily built hull with enough stability to keep a beginner out of trouble. Construction: Plywood. No lofting is required. Plans include 5 sheets.
HADRON is a new dinghy design for 2011.
Resembling her 8′ cousin more than the sleeker 12′ Acorn, this chunky dinghy will be a good load carrier for her length—and she looks very, very British.Oughtred saves you from guess work by showing precisely how her planking should be lined off.Construction: Glued lapstrake plywood.Alternative c
The design of the Fisherman 23′ came from the request of a customer to build a sport fishing boat, fast, trailerable and also comfortable for family trips.
It’s a boat of modern design that is inspired by the American fisherman, with forms less pronounced.
“Breeze” is a 10′ (3m) double paddle canoe. Two sheets of plywood needed. Stitch and glue construction using 3″(75mm) fiberglass tape in epoxy for all seams inside and out. The deciding factors when designing the boat were mostly the same as with all my designs - seaworthiness and lightweight.
The Matunuck is a surf kayak designed by Nick Schade to be comparable with the best carbon-fiber surfyaks on the market.
Complete with spars and sails. Lying Cape Cod. Last restored c1970. Cockpit and deck are newer.
Lord Nelson Royal Navy 1798 pattern Pinnace. Pine on oak. Length 28.5 feet. Needs few repairs.