Oar / Paddle
The Open Boat
This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here.
There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick.
The Noank Pulling Boat is an 18′ x 36″ [5.5m x 91cm] sliding seat rowing boat suitable for open water travel.
MANDOLINO is an elegant, classical seaworthy small boat that we propose in two versions, one for day-sailing and one for cruising.
Small enough to load on top of a car, but large enough to seat two adults...
“Breeze” is a 10′ (3m) double paddle canoe. Two sheets of plywood needed. Stitch and glue construction using 3″(75mm) fiberglass tape in epoxy for all seams inside and out. The deciding factors when designing the boat were mostly the same as with all my designs - seaworthiness and lightweight.
High capacity yacht tender with sailing ability. Exceptional stability, suited to beginner boatbuilders
day- weekendsailer for coastal cruising in radial chine plywood construction
ZEN is a very simple 10 Foot boat (www.diecipiedi.it) particularly narrow and therefore unstable. It is not the right boat for a beginner but, in the hands of a good helmsman, it may be fast.
The Multi 6 is a multihull with a simple construction and good performance. The construction is extremely simplified by the drift absence. The good hulls volume allows to spend pleasant days and moving along the coasts with other friends, having the opportunity to carry up to six people.
Glued-lap plywood rowing or sailing tender with plenty of capacity. Construction: Glued lapstrake plywood. No lofting required. Plans include 5 sheets.
Located in Mystic, Connecticut - 3 staterooms and salon with A/C units, sleeps 8 - well maintaine
Wood hull built with meticulous and painstaking detail from a kit using a "stich-and-glue" method