Plans & Kits

An easily built ,attractive, plywood pirogue/canoe.

Tern is a lengthened (to 23'9') version of my earlier 20' design Ratty.

The CS-18 is an open interior design with the home builder in mind. It is designed for an above deck fuel tank and less aggressive flare in the bow. These features make this design an easier and faster build and at 18.5′, it will fit in most home garages.

Waverunner 24 - PLYWOOD Planing hull

Good performance with modest horsepower, a soft and predictable ride. I/O or outboard, 80-200hp.

Paddlers are demanding versatility AND performance from their sea kayaks these days. Little by little, designers like Nick Schade are squeezing huge performance out of compact dimensions.The Petrel Play is just 14 feet long, a length once reserved for recreational kayaks.

26′ Auxiliary KetchBased on a traditional fishing vessel type called a “Cowhorn” this design features an inboard engine and ballast keel.The arrangement provides two berths, a head and modest galley.

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick.

Tolman Skiffs are thoroughly modern, ocean capable, vee bottom stitch and glue plywood boats with a dory ancestry. These skiffs are designed for Alaskan waters and are ideal for sport fishing, beach camping, cruising and general work or recreation.

Rugged carvel construction, round bottomed. Driven by a small inboard. Construction: Carvel planked over steamed frames. Alternative construction: Cold-molded, Strip. Lofting is required. Plans include 3 sheets.